AVE 6 Position Rotating Source
This
jig can be retro-fitted to most small coating plant, for example the
BOC Edwards 306 series coating plant for sequential resistive
evaporation of several materials. It is supplied complete with a right
angled rotary drive and drive chain.
|
|
Rotary Planetary Substrate Jig
Shown
is a system designed and developed for a special 20" high vacuum
coating plant. The jig is designed to give both height and angle
adjustments on the planets. The planets counter-rotate to give optimum
coverage of the required coating. All construction materials were UHV
compatible.
|
|
Vacuum/Pressure Resin Impregnation Plant
Resin impregnation is commonly used in the production of high quality coils and transformers. The varnish impregnation unit shown is used in the production of large transformers and has been in production 24/7 for several years.
|
|
Vacuum/Pressure Kerosene Filling Plant
Capable of the simultaneous filling of up to 30 Self Acting Temperature Controls. This equipment was designed and built to the customers specification and requirements. It is PLC controlled and requires minimal operator intervention.
|
|
Bell in a Bell Jar Experiment
With
the bell ringing continuously it can be easily heard outside the jar.
Once a vacuum pump is turned on, the air is slowly removed. As this
happens, the sound diminishes until eventually it cannot be heard at
all.
The picture on the right is of equipment supplied to the @Bristol exhibition, fully automated with visitor operating controls.
|
|
Stainless Steel Vacuum Oven
This vacuum oven was built to be used to vacuum dry valves after water testing. The temperature was controlled at 60 degrees Centegrade. A PLC was fitted to control the drying cycle from start to finish.
|
|